ESU HO 53616 LokPilot Standard DCC, PluX12 interface
LokPilot DCC Standard, PluX12 interface, 4 amplified output operating modesThe LokPilot Standard is a first class DCC decoder. 14-128 speed steps simply go without saying as well as 2 and 4 digit addresses. Thanks to RailComPlus the decoder automatically register at a suitable command station (ECoS EC). It supports all DCC programming modes and can be operated and programmed with all DCC compatible digital command stations: Thanks to Railcom One can therefore read out CV values ââon the main with a suitable command station. Programming is particularly comfortable with the ESU LokProgrammer WHERE see all parameters in plain text on your PC monitor. Motor controlthe output stage of the LokPilot decoder standard Generates 0. 9A continuous current and Easily handles all Commonly available DC motors as well as coreless motors; Regardless if the motor is by ROCO, Fleischmann, Tillig, Piko, Brawa, Bemo, Faulhaber or Maxon. Load control with 20 kHz PWM frequency Assures quiet running and lets your locomotives crawl slowly over your layout if you wish them to do that. Load Control Can Be Adapted opti mally to the Particular type of motor by Means of three CVs. Due to the simulated inertia The locomotive will not jerk, not even in 14-speed step mode. Analogue worldThe LokPilot standard therefore can be used on analogue DC layouts. THEREFORE the operational area of ââyour locomotives may well be extended to "non-digital" layouts without any problems. Function outputsThe LokPilot standard decoder has FourFunction outputs. The decoder with the 21MTC plug Has Two additional outputs without end stage, Which Can Be utilised for controlling lighting and other functions in Conjunction with a suitable adapter board (eg ESU 51968). All important lighting functions (eg blinking lights, Mars light, flashing light) are available and can be set just like the brightness of each output. The integral shunting mode assists you in delicate shunting maneuvers in the yard, Which is thus enhanced by the option to turn off acceleration and deceleration with a function button. Thanks to a simplified method for "function mapping" similar to the method Described in the NMRA standard all function outputs can be assigned to any function Easily button (F0 to F20) According to your requirements. ProtectionOf course, all function outputs as well as the motor output are protected against overload. We want you to enjoy the features of our decoder for as long as possible! Future proofThe LokPilot standard can be updated and, if Necessary, new operating software can be uploaded with the aid of the ESU LokProgrammer. THUS your decoder always stays up to date, even after the purchase!
Regular price $19.99 USD
Regular priceUnit price per