ESU HO 53614 LokPilot Standard DCC, 21MTC interface

Skip to product information
  • ESU HO 53614  LokPilot Standard DCC, 21MTC interface
  • ESU HO 53614  LokPilot Standard DCC, 21MTC interface
LokPilot standard, DCC decoder with 21MTC after NEM660, 4 Amplified outputs + 2 LogikausgangeBetriebsartenDer LokPilot Standard is a premier DCC decoder. 14-128 speed steps are selbstverstandlich as 2- and 4-digit addresses. Thanks RailComPlus the decoder Report fully automatically at a suitable command station (eg. As ECoS). He dominated all DCC programming and can not only be driven with all DCC compatible digital command stations, but also programmed: Thanks to Railcom with appropriate centers, a reading of CV values ​​on the main DC possible. Especially simple is the programming with the help of the ESU LokProgrammer-right on your PC screen. MotorsteuerungDie final stage of the LokPilot decoder standard provides up to 0. 9A continuous current and is clear with all the common DC and coreless motors; whether from ROCO, Fleischmann, Tillig, Piko, Brawa, Bemo or Faulhaber and Maxon. The back EMF with 20 kHz PWM frequency ensures silent motor operation, and lets your engines crawl slowly on the layout. The load control can be optimally adjusted by means of three CVs to the motor you are using. Thanks to mass simulation ride your engine even with only 14 speed levels not jerky. Analog function Ender LokPilot standard can be used without any problems on analogue DC layouts. A run your locos "non-digital" team mate Nothing stands in the way. Function Ender LokPilot standard decoder has four function outputs. In addition, (at 21MTC) unverstarkte two outputs are available, which can be used for the control of lighting and special functions also in conjunction with matching adapter boards (z. B. ESU 51968). All important light functions (z. B. Flashing, Marslight, Blitzer) are available and will as well as the brightness of each output can be set separately. The built-in switching helps them to glide smoothly around the depot area as well as the possibility of the acceleration and braking delay to switch off at a keystroke. Thanks to a simplified style similar to the NMRA standard "Function mapping" can function outputs (up to F20 F0) assigned to the function keys easily arbitrarily. SchutzSelbstverstandlich all function outputs and the motor output overload protected. We want you to have long to enjoy your decoder! EingebautDer future LokPilot standard is updatefahig and can be obtained if necessary with the help of the ESU LokProgrammer new operating software. So your decoder remains even after the purchase is always on the cutting edge of technology!
1 of 1


Regular price $19.99 USD
Regular price Sale price $19.99 USD